You can gently pivot the nozzle assembly out of the way & see inside. A ribbon type flex cable connects these two pieces. I just removed the 2 screws attaching the white nozzle assembly to the main black plastic printhead housing. What supposedly breaks or goes wrong when taking apart a printhead? Has anyone ever took one apart & put back together & had it work? Perhaps an electrical connection broke that I was not aware of. I was thinking about using the iP3000 again & either buying a new printhead or taking it apart again. I knew this before taking it apart but felt there was nothing to lose. I was warned this would probably create a printhead error, and it did. My last resort was taking apart the printhead by removing the 2 tiny screws on the bottom & seeing if there was some type of internal leakage between pathways. Each cleaning solved the problem, but for only a few days. Eventually I resorted to cleaning the printhead with water then later with alcohol. ![]() As if running some yellow ink through the printhead flushed out possible contamination from the magenta. ![]() However it would print yellow after a nozzle clean cycle or printing a lot of yellow. A few years ago I had a Canon iP3000 which started printing a rusty orange color instead of yellow.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |